iRepository at Perpustakaan UniMAP >
Final Year Project Papers & Reports >
School of Microelectronic Engineering (FYP) >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/1352

Title: Temperature Controller with a digital temperature display
Authors: Mohd Hafidz Rosli
???metadata.dc.contributor.advisor???: Mohd Nazrin Md Isa (Advisor)
Keywords: Temperature control;Temperature display;Electronic controllers -- Design and construction;C (Computer program language);Detectors;Sensors;Electronic controllers
Issue Date: Apr-2007
Publisher: Universiti Malaysia Perlis
???metadata.dc.publisher.department???: School of Microelectronic Engineering
Abstract: Temperature Controller with a Digital Temperature Display was designed to control the intensity of heat or cold and measure the temperature to display the actual temperature of the space between ranges -55°C to +150°C on a Liquid Crystal Display (LCD). This project is divided into two parts, that Temperature Controller and Temperature Display. The temperature will detected from a temperature sensor model LM35 (precision centigrade temperature sensor) who can detect a temperature range between -55°C to +150°C. Temperature Controller is the first part of the project and was designed to control a temperature of a room or space. The operation of the part is based on relay as a switch for a fan that is used for cooling purpose. A fan is automatically on when temperature is going high and the speed will going the maximum volume when temperature is very high (hot). When temperature going low (cool), a fan speed will decrease and stop when reaching a normal room temperature. Temperature Display is second part of the project and was designed to display the actual temperature of the room or space between ranges -55°C to +150°C at the LCD screen. This part is divided into two, which are hardware and software. The hardware part was designed the circuit of temperature display. The software part was building a language coding to display the temperature at the LCD display. The language coding was designed used C language and used a software called Keil μvision3 software to write, compile and generate HEX file. The language coding was inserted to microcontroller to display the temperature on a LCD. The two parts, that is temperature controller and temperature display was combined and makes a Temperature Controller with a Digital Temperature Display.
Description: Access is limited to UniMAP community.
URI: http://hdl.handle.net/123456789/1352
Appears in Collections:School of Microelectronic Engineering (FYP)

Files in This Item:

File Description SizeFormat
Abstract, Acknowledgment.pdf89.83 kBAdobe PDFView/Open
Conclusion.pdf82.26 kBAdobe PDFView/Open
Introduction.pdf59.58 kBAdobe PDFView/Open
Literature review.pdf402.74 kBAdobe PDFView/Open
Methodology.pdf234.79 kBAdobe PDFView/Open
References and appendix.pdf154.09 kBAdobe PDFView/Open
Results and discussion.pdf114.57 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback