iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/10197

Title: Microstructural analysis of iron aluminide fabricated from iron mill scale by powder metallurgy method
Authors: Nurul Syuhada, S.
Ruhiyuddin, Mohd Zaki
Khairel Rafezi, Ahmad
???metadata.dc.contributor.url???: syuhada84@ hotmail.com
Keywords: Iron mill scale;Green compact;Sintering;Scanning electron microscopy (SEM);Energy dispersive spectroscopy (EDS);International Conference on X-Rays & Related Techniques in Research & Industry (ICXRI)
Issue Date: 9-Jun-2010
Publisher: Universiti Malaysia Perlis
???metadata.dc.publisher.department???: School of Materials Engineering & School of Environmental Engineering
Citation: p.179-181
Series/Report no.: Proceedings of the International Conference on X-Rays & Related Techniques in Research & Industry (ICXRI) 2010
Abstract: This research describes the microstructural of iron aluminide which fabricated from iron mill scale by powder metallurgy method. The raw material used consists of iron mill scale and aluminum powder. Iron mill scale is obtained from steel plant company in north Malaysia. This mill scale was milled for 4 hours with grinding media to produce a fine particle size and then the mill scale was sieved into a different size. After that, the premix of iron mill scale and aluminum powder was compacted with 5.7 ton load and the process was conducted at room temperature. The green compact were subjected to sinter in condition of nitrogen atmosphere at 500ûC with 8°C/min heating rate and soaking time was set for 30 minute. The structural characteristics of sintered sample and raw material investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) methods are presented. SEM result of the sintered sample obtained at 500ûC showed that some particle of iron mill scale do not react with aluminum powder to create bonding together. This means the temperature that used for sintering do not reached the suitable sintering temperature.
Description: International Conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2010) jointly organized by Universiti Malaysia Perlis (UniMAP) and X-Ray Application Malaysia Society (XAPP), 9th - 10th June 2010 at Aseania Resort Langkawi, Malaysia.
URI: http://hdl.handle.net/123456789/10197
ISBN: 978-967-5760-02-0
Appears in Collections:Ruhiyuddin Mohd Zaki
Conference Papers

Files in This Item:

File Description SizeFormat
Microstructural_A..._Powder_Metallurgy_Method.pdfAccess is limited to UniMAP community.840.89 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback