Browsing by Subject "Fracture toughness"
Now showing items 1-6 of 6
-
Determination of fracture toughness for uncarburized and carburized low carbon steel
(Universiti Malaysia Pahang (UMP), 2009-06-20)Surface hardening such as solid carburizing is well known in the engineering field and the basis of this action is to extend the life span of machines and other metal structures in order to cope with economic demand. ... -
Determination of plane strain fracture toughness for AZ61 Magnesium alloy
(Universiti Malaysia Perlis, 2009-12-01)A stress intensity factor K was used as a fracture parameter to determine the true material property, i.e. plane strain fracture toughness KIC of AZ61 magnesium alloy using a single edge notch bend (SENB) specimen in ... -
Effect of Al2O3/ZrO2 reinforcement on the mechanical properties of PMMA denture base
(Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)Study on the properties of denture base materials made from PMMA filled with Al2O3/ZrO2 was carried out. The amount of Al2O3/ZrO2 filler was fixed at 5 wt%. However, the ratio of Al2O3 to ZrO2 added was from 0 to 100. Samples ... -
Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites
(Elsevier, 2019)This article presents the effects of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites. In particular, it explores the effect of these natural fillers on the horizontal ... -
Fracture toughness test of epoxy adhesive dissimilar joint with various adhesive thicknesses
(The Japan Society of Mechanical Engineers, 2010-11)In this study, effect of bond thickness upon the strength and fracture toughness of epoxy adhesive dissimilar joint is investigated. Tensile and three-point-bending (abbreviated as 3PB hereafter) fracture tests are conducted. ... -
Strength and fracture characteristics of SUS304/AL-Alloy scarf adhesive joint with various adhesive thicknesses
(Trans Tech Publications, 2011-01)In this study, strength and fracture toughness of epoxy adhesively bonded scarf joints of dissimilar adherends, namely SUS304 stainless steel and YH75 aluminium alloy are examined on several scarf angles and various bond ...