Browsing by Subject "Flexural strength"

Now showing items 1-8 of 8

    • Effect of Al2O3/ZrO2 reinforcement on the mechanical properties of PMMA denture base 

      Ahmed Omran, Alhareb; Zainal Arifin, Ahmad (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)
      Study on the properties of denture base materials made from PMMA filled with Al2O3/ZrO2 was carried out. The amount of Al2O3/ZrO2 filler was fixed at 5 wt%. However, the ratio of Al2O3 to ZrO2 added was from 0 to 100. Samples ...

    • The effect of inter laminate layer on flexural strength for unsaturated polyester resin reinforced hybrid fabric composite 

      Hind W., Abdullah; Mustafa A., Rajab; Ziad T. Khodair; Jasim, Alkhalidi (Universiti Malaysia Perlis, 2020-01)
      The present study aims to examine the effects quality, sequence and direction of the layers for three types of fibers: orthogonal glass fibers, randomized glass fibers, short carbon fiber cut on the bending test using a ...

    • Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites 

      Roshasmawi, Abdul Wahab; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Khairul Nizar, Ismail, Dr. (Trans Tech Publications, 2013)
      In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ...

    • Experimental study of slurry infiltrated fiber reinforced concrete 

      Mustaqqim, Abdul Rahim; Zuhayr, Md Ghazaly; Raja Mamat, Raja Nurazira; Muhammad Azizi, Azizan; Nur Fitriah, Isa; Shahiron, Shahidan (Trans Tech Publications Ltd, 2016)
      Slurry Infiltrated Fiber Reinforced Concrete (SIFCON) is a relatively new high performance and advanced material and can be considered as a special type of Steel Fiber Reinforced Concrete (SFRC). The hooked-end shape steel ...

    • Flexural properties of natural fiber filled high density Polyethylene (HDPE) composites 

      Azlin Fazlina, Osman; Azmel Hakim, Zainol Abidin; Mohd Faizal, Suaib (Universiti Sains Malaysia (USM), 2008-11-26)
      Attempt has been made to combine the advantages of natural fiber and polymer. Composites based on high density polyethylene (HDPE) and two types of natural fiber were made through melt blending and compression molding. ...

    • Flexural strength of recycled concrete aggregate and high strength steel rebar 

      Mohd Shahrul Izwan, Razmi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This study was conducted to determine the flexural strength of normal concrete in combination with recycled concrete. Use of recycled concrete in this study to replace the volume of aggregates using a different percentage ...

    • Properties of modified polystyrene lightweight aggregate in concrete 

      R., Fetra Venny; Khairul Nizar, Ismail, Dr.; Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Pahang, 2009-06-20)
      Several experiments were conducted to characterize the properties of modified polystyrene lightweight aggregate in concrete. Microstructure of modified polystyrene lightweight aggregate in concrete can be assessed by ...

    • Seismic performance of monolithic wall panel subjected to quasi-static lateral cyclic loading 

      Nor Hayati, Abdul Hamid, Dr. (The Institution of Engineers, Malaysia, 2008-09)
      A half-scale of monolithic precast wall panel (4000x1350x125) together with foundation beam (3000x500x465) is designed to emulate the behaviour of a ductile cast-in-place concrete wall and designed accordance to New Zealand ...