Browsing by Author "tijjaniadam@yahoo.com"
Now showing items 1-20 of 26
-
Analysis of capillary filling in micro channels for passive fluid dynamics in Nano lab on chip domain
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Thikra S., Dhahi; M. Wesam, Al-Mufti; Khaled Emraje, Mohamed Elderjy (Trans Tech Publications, 2014)A fluid dynamics in a micro channel for analytical chemistry and different aspects of this type of flow for specific application has remained a long-acting problem in the last two decades considering its numerus applications ... -
COMSOL Multiphysics Simulation in biomedical engineering
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr. (Trans Tech Publications, 2014)In the past two decades, COMSOL Multiphysics Software Package have emerged as a powerful tool for simulation, particularly in Nanotechnology and most importantly in biomedical application and various application involving ... -
Conventional photolithography and process optimization of pattern- size expansion technique for nanogap biosensor fabrication
Balakrishnan, Sharma Rao; Muhammad Nurfaiz, Asri; Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)For a submicron photolithography process, there is little room for error. In this paper, an optimized technique for photoresist (PR) development is reported, to fabricate a nanogap biosensor for application in biomedical ... -
Designing an Artificial Neural Network model for the prediction of kidney problems symptom through patient's metal behavior for pre- clinical medical diagnostic
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; U. S., Sani (Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)This paper contains a report on a very simple functional model of Artificial Neural Networks, the article is proposed to aid current pre-clinical patient diagnosis methods. The study investigated the use of Artificial ... -
Effect of anodizing voltage on the morphology and growth kinetics of porous anodic alumina on Al-0.5 wt% Mn alloys
Voon, Chun Hong; Mohd Nazree, Derman, Dr.; Uda, Hashim, Prof. Dr.; Foo, Kai Loong; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)In this study, the effect of anodizing voltage on the morphology of porous anodic alumina and growth kinetics of anodizing of aluminium manganese alloy was reported. It was found that the increasing anodizing voltage affect ... -
Fabrication and characterization of IDE based sensor through conventional lithography method
Haarindra Prasad, s/o Rajintra Prasat; Uda, Hashim, Prof. Dr.; Foo, Kai Loong; Tijjani Adam, Shuwa; Mohd Shafiq (Trans Tech Publications, 2014)This paper mainly illustrate regarding the fabrication process of IDE based sensor for bio-molecular detection process. Material that is utilized in this process is zinc oxide due to bio-compability and elevated electrical ... -
Fabrication of nanostructure based biosensor for biomolecules detection
Shahrul Aizzam, Ariffin; Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Faridah, Salam; Zamri, Ishak; Muhammad Nur Aiman, Uda (Trans Tech Publications, 2014)Lately, nanostructure based biosensor application has drawn a lot attention among fellow researchers because of speciality to detecting cell, tissue and even disease caused by viruses either from humans, animals or ... -
Fabrication of nanowire using ash trimming technique
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling; Qazi Muhammad, Humayun (Trans Tech Publications, 2013)The paper present a report on fabrication of Nanowire using plasma oxidation, we monitor changes by studying the morphology and Δw/Δh, the study also revealed that the proposed fabrication method could potentially be used ... -
Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method
Mohammad Nuzaihan, Md Nor; Uda, Hashim, Prof. Dr.; Nazwa, Taib; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ... -
Formation of carbon nanotubes from methane decomposition: Effect of concentration of Fe₃O₄ on the diameters distributions
Wei Wen, Liu; Tijjani Adam, Shuwa; Azizan, Aziz, Assoc. Prof. Dr.; Abdul Rahman, Mohamed, Prof. Dr.; Uda, Hashim, Prof. Dr.; Chai, Siang Piao (Trans Tech Publications, 2014)Fe₃O₄ was used to synthesize narrow diameter of carbon nanotubes (CNTs). The effect of concentration of Fe₃O₄ on the diameters of carbon nanotubes (CNTs) synthesized by methane decomposition at 1000°C was investigated. We ... -
Low cost detection of pH and its effect on the capacitive behavior of micro-gap sensor
Qazi Muhammad, Humayun; Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)The article describes the fabrication and characterization of silver microgap sensor on silicon substrate. By employing cheap photolithography process the proposed microgap sensor has been fabricated. The silver microgap ... -
Low cost fabrication of micromixer and microchamber for microfluidic lab-on-chip
Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa; M. Wesam, Al-Mufti; Ling, Peter Jie Lung; Shahrul Aizzam, Ariffin (Institute of Electrical and Electronic Engineers (IEEE), 2012)Microfluidic technology has been given the contribution in biomedical and chemistry. The testing and diagnosis on bio-reagents has the efficiency increased through the implementation of microfluidic technology, such as lab ... -
Mask design and fabrication of Micro/Nanowire biochip for reliable and repeatability pattern transfer
Veeradasan, Perumal; Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)In Micro/Nanowire fabrication, the alignment and exposure process are the most critical steps in photolithography process, and indeed for the whole biochip processing. This process determines the success of transferring ... -
Mask design and simulation: Computer aided design for lab-on-chip application
Veeradasan, Perumal; Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)A simple design and simulation of microwire, contact pad and microfluidic channel on computer aided design (CAD) for chrome mask fabrication are described.The integration of microfluidic and nanotechnology for miniaturized ... -
Mask design for the reproducible fabrication and reliable pattern transfer for polysilicon nanowire
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling (Institute of Electrical and Electronics Engineers (IEEE), 2012)In fabrication of Nanowire alignment and exposure are the most critical steps in photolithography process, the resolution requirements and precise alignment are vital, each mask needs to be precisely aligned with original ... -
Microstructure and polymer choice in microfluidic interfacing for nanoscale biosensing
Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Mohd Faizul, Bari, Dr.; Pei, Ling Leow (Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)Miniaturization of Biosensors based on nanotechnology are rapidly developing with gaining of undisputable ground and are becoming widespread in the biomedical with capability of improving the existing current diagnosis ... -
Modular architecture of a non-contact pinch actuation micropump
Chee, Pei Song; Rashidah, Arsat. Dr.; Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Ruzairi, Abdul Rahim, Prof. Dr.; Leow, Pei Ling (MDPI, Basel, Switzerland., 2012-09)This paper demonstrates a modular architecture of a non-contact actuation micropump setup. Rapid hot embossing prototyping was employed in micropump fabrication by using printed circuit board (PCB) as a mold material in ... -
Negative Pattern Scheme (NPS) design for nanowire formation using scanning electron microscope based electron beam lithography technique
Mohammad Nuzaihan, Md Nor; Uda, Hashim, Prof. Dr.; Siti Fatimah, Abdul Rahman; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)In this work, we report the used of Negative Pattern Scheme (NPS) by Electron Microscope Based Electron Beam Lithography (EBL) Technique in connection with scanning electron microscope (SEM) for creating extremely fine ... -
Plant diseases detection using nanowire as biosensor transducer
Shahrul Aizzam, Ariffin; Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Faridah, Salam; Zamri, Ishak; Muhammad Nur Aiman, Uda (Trans Tech Publications, 2014)The plant disease such as Cucumber Mosaic Virus (CMV) and Papaya Ring Spot Virus (PRSV) is a most dangerous disease that can decrease productivity and quality of the vegetable and fruit. Besides that, its also can destroy ... -
Resist uniformity evaluation through swing curve phenomena
Uda, Hashim, Prof. Dr.; Tijjani Adam, Shuwa (INSInet Publications, 2012)In fabrication of Micro/ Nano structure, alignment and exposure are the most critical steps in photolithography process, the resolution requirements and precise alignment are vital; each mask needs to be precisely aligned ...