Browsing by Title
Now showing items 68082-68101 of 79150
-
Study on Characteristics of Lightweight Aggregate Concrete Made From Foam and Ordinary Portland Cement
(EDP Sciences, 2016)The production and characteristic of lightweight bubble aggregates (LBA) are presented in this paper. The LBA are produced by mixing between the foam and ordinary Portland cement according to the composition which has ... -
Study on characteristics of sediment and sedimentation rate at Sungai Lembing, Kuantan, Pahang
(Malaysian Technical Universities Network (MTUN), 2012-11-20)Sedimentation rate is quite important for development our country. It also can avoid the problem which related to our human society such as flood and water quality. As example, the depth of river become shallow if the ... -
Study on chitosan thin film for vapour sensor application
The aim of this project is to analyse the electrical properties of the chitosan film sensor exposed to water, methanol and toluene. Chitosan film has proven to be potential as reliable sensor for methanol and toluene ... -
A study on classicifation of Perlis river
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Nowadays, water pollution was viewed primarily as threat to human health. It poses serious health effect to the people as well as aquatic life. Hence, it is important to study the pollution level of river because they help ... -
A study on communication method between two humans during cooperative task
(Universiti Malaysia Perlis, 2009-09-11)At present the majority of autonomous robots are mostly used in factories where speed and accuracy are given highest priority. In our research, we are focusing in the area where the robot that cooperate with human to lift ... -
A study on contraction of Pneumatic Artificial Muscle (PAM) for load-lifting
(Universiti Malaysia Perlis (UniMAP), 2016-06)Pneumatic Artificial Muscle (PAM) is a type of actuator that similar to human muscle. The PAM is used for converting pneumatic power to pulling force and eventually causing movements of the mechanism. One of the potential ... -
A study on corrosion behavior of Mild Steel in Granulated Blast Furnace (GBFS) fly ash geopolymer
(Universiti Malaysia Perlis (UniMAP), 2017-04)This research presents the corrosion behavior of mild steel embedded in geopolymer paste that produced by the reaction of fly ash and slag with an alkaline activators (NaOH molarity of 12 M, Na2SiO3/NaOH ratio of 2.5). ... -
A study on corrosion resistance of Sodium Metavanadate (NaVO3) coated on AZ91D Magnesium alloy by anodizing technique
Anodizing also known as anodic oxidation coatings have attracted significant interest in the study because of their potential to improve the corrosion resistance of alloys. Anodic oxidation coatings are usually chosen ... -
A study on design and develop a concurrent problem solving method in mould flow analysis
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2009-05)CAE techniques have in recent years, become increasingly popular in plastic injection molding. However, in most practices, either molding parameters are not optimized or the optimization techniques are too complex to use. ... -
A study on design of computer workstation in Polytechnic of Sultan Azlan Shah
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)This paper discusses the anthropometric data and the suitable design of computer workstation in Polytechnic of Sultan Azlan Shah. The objective of this paper is to propose an appropriate design of chair and desk dimensions ... -
Study on determination of calorific value of selected local weeds for ‘Waste to Wealth’ program
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Weed is a plant that is considered by the user of the term to be a nuisance, and normally applied to unwanted plants in human-controlled settings, especially farm fields and gardens. The objective of this study is to ... -
Study on development of low cost binder for concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)The durability and strength of concrete can be seen on its damage done by human activities and the effect by the environment. Moreover, concrete performance depends on the capacity of the binder in the concrete mixture. ... -
A study on different localities of Soft Exoskeleton for hand grasping using pneumatic actuator
(Universiti Malaysia Perlis (UniMAP), 2016-06)This project is related to the soft exoskeleton for hand grasping using pneumatic actuator on different localities. The device is lightweight and easy wearable due to the usage of soft pneumatic actuator. The number of ... -
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre reinforced MMCs. This study involves the fabrication of MMCs with ... -
Study on differentiation of tensile and Ultrasonic modulus of Highway Guardrail
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the differentiation of Young’s modulus between conventional tensile technique and ultrasonic technique. Highway guardrail used as a sample in this study was courtesy by highway concession. ... -
Study on diffusivity of Gallium dopant in Silicon using Spin On Dopant (SOD) technique
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Diffusion and ion implantation are two major processes by which chemical species or dopant are introduced into a semiconductor such as silicon to form the electronic structure. The diffusion process is a method to control ... -
Study on effect of filler loading on the flow and swelling behaviors of polypropylene‐kaolin composites using single‐screw extruder
(Wiley Periodicals, Inc., 2011-01)Melt flow and extrudate swelling behavior of polypropylene-kaolin (PP-Kaolin) composites were investigated using a single-screw extruder. Kaolin was mixed with polypropylene (PP) using a heated two-roll mill at 185°C and ... -
A study on effect of hydrogen sulfide emission at lanffill towards residents and landfill worker perception on odour and health quality
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)This paper report result of a study on effect of hydrogen sulfide emission at landfill towards resident and landfill worker perception on odor and health quality. The first objective are to investigate the emission of ... -
Study on effect of Vermicomposting towards heavy metal in polluted soil
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)An assessment was made on soil from mango farm in Kampung Behor Janggus, Perlis. Types and percentages of heavy metal in the soil sample are determined by using X-Ray Fluorescene (XRF). Three (3) concentrations of the ... -
Study on effect pretreatment of Rice Husk by using the FTIR
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)A computational approach was used to analyze the FTIR spectra of a wide range of treated and untreated lignocellulosic material which is rice husk. Rice husk was treated with dilute sulphuric acid in a room temperature ...